Polycarbonate greenhouse to the wall Tulipan D25

Rated 5.00 out of 5 based on 1 customer rating

Price range: 32 340Kč through 53 171Kč

NEWS! Greenhouse width 2.5m, height 2.5m, length from 2m. A wall-to-wall polycarbonate greenhouse suitable for a wide range of requirements for discerning growers. The garden greenhouse has a side opening system. Special polycarbonate for greenhouses with a UV filter has a light transmission of up to 86%. Greenhouse passable on both sides.

Vaše doprava pro objednávku je zdarma!

Part of the greenhouse

Tloušťka prosklení

Clear

Před objednávkou, pozorně prosim vše přečtěte. Přeji vám spokojenost s vámi vybranými produkty

Informace o dopravě a platbě > >

10 People watching this product now!

SKU: N/A Categories: POLYCARBONATE GREENHOUSES, Fixed greenhouses, Greenhouse to the wall, Sliding roofs

Description
Additional information

Description

Polycarbonate greenhouse to the wall Tulipan D25

Convenient and versatile polycarbonate wall-mounted greenhouse with opening sides. Ideal for confined spaces. Can be used as a garden greenhouse, gazebo, conservatory or pool cover, it is the best solution for installation against the wall of the house or along the fence. The frame is made of 40×20 and 20×20 galvanized pipe, which can withstand snow loads of more than 200 kg/m2. Sliding side parts with a width of 1 metre
Fixed arches are used and connected to vertical racks. This increases the reliability of the entire structure. At the ends there are two doors with ventilation holes to improve ventilation of the greenhouse.

Also, when installing two such greenhouses end-to-end, a greenhouse with a width of 5 meters is obtained, which, if necessary, can be divided by a partition and a greenhouse with different climatic conditions for growing is obtained.

By using two greenhouses and an additional central part, you can get a greenhouse with a width of 7.5 meters!

The All Inclusive package – with a greenhouse already includes:

metal frame of the greenhouse;
metal base, which provides a reliable, even base necessary for the proper functioning of sliding systems!;
polycarbonate;
(New!) movable sections are supplied assembled (you only need to screw on the handle);
(New!) all the necessary gaskets that will make the greenhouse more airtight and eliminate the rattling of polycarbonate during gusts of wind;
(New!) Vapor barrier tape and profiles protect open polycarbonate honeycombs from moisture, dust, dirt and insects.

Polycarbonate glazing

Special certified hollow polycarbonate for garden greenhouses with UV filter. The advantage of this product is its high thermal insulation against glass. Resistant to mechanical damage, weathering, and hail. Exceptional translucency of polycarbonate (clarity – up to 86%). Polycarbonate is supplied in a roll and is attached to the structure with self-tapping screws.

Moving sections are delivered assembled (only need to screw on the handle)

Recommended accessories :

Greenhouse parameters:

roof

material

polycarbonate

material

Wall Strength

doors

anchoring

warranty

Type of construction	Fixed
Permissible load	200 kg/m2
width	2.50 m
Height at the top	2.50 m
Height in the middle	2.15 m
Height at the bottom of the	1.85 m
Height of the sliding side part	1.46 m (for ventilation and easy access to crops)
Length (variants)	4 m; 6 m; 8 m; (longer can be done – modulation in 2 m increments)
Glazing	polycarbonate 4mm
UV protection of	yes
Dimensions of the boards	6 x 2.1 m
Construction	Hot-dip galvanized steel
Steel	1mm (40% thicker than conventional arc greenhouses)
Distance between curves	1 meter
type	passable on both sides
Front	2 pcs
door	2 x 0.9 m
Ventilation window front	2 pcs
Polycarbonate	Screws with washers and nuts M5
Anchoring to the ground	Related Products
base	Included in the package
Polycarbonate	10 years
Construction	5 years

Foundations for a greenhouse

To ensure the durability of the greenhouse, it is recommended to install it on a pre-prepared base – a foundation, made on the basis of its dimensions around the perimeter of the base, for example, in the form of a frame with a thickness of 100… 200 mm, which will significantly reduce the corrosion activity.

The frame of the greenhouse should be fixed to the foundation with screws or nails to prevent it from tipping over in strong winds.

The polycarbonate greenhouse can be fixed according to the priority of each customer, it can be installed in the ground (fixation is provided by anchor feet), wooden prisms 10 x 10cm or on a concrete base. However, in general, anchoring to a concrete base is a better choice that will significantly reduce corrosion activity.

Mountings

Assembling a greenhouse is also simple and does not require special skills. Only a minimal set of tools is needed – a wrench, a screwdriver, a knife. You will receive detailed instructions along with the greenhouse. The illustrated instruction will further simplify the process of building a greenhouse,

If you don’t have time for installation, you can order installation from our specialists, who will assemble everything for you with high expertise and in the shortest possible time. Although the assembly of the entire greenhouse is simple, it takes the most time to cut and edge the polycarbonate and mount it on both front sides of the greenhouse. That is why we offer you the possibility of ordering this part of the assembly, which is carried out in our warehouse, you will receive both front sides filled with polycarbonate from the carrier.

The greenhouse can be modified and the implementation of extensions is possible in the future, so the theoretical length of the greenhouse is unlimited.

Alternatives

Additional information

Dimensions	N/A
Výrobce	AGROFLEX , ArlaPLastCZ
Kategorie	garden greenhouses
Model	Tulip D25
Šířka	2.50 m
Výška	2.50 m
Materiál zasklení	polycarbonate
Tloušťka prosklení	4mm
Tvar	to the wall
Požadované vlastnosti	Ventilation roof window
Typ konstrukce	fixed arches
Kostra	steel 40 × 20 mm
Typ dveří	single-leaf
Materiál konstrukce	galvanized steel
Síla stěny jeklu	1.00 mm